dmesg - 2011-03-19 13:45

Return To 2011-03-19 13:45 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.18.2.el6.x86_64 (mockbuild@x86-003.build.bos.redhat.com) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Wed Mar 2 14:17:40 EST 2011
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfe0ac00 (usable)
 BIOS-e820: 00000000cfe0ac00 - 00000000cfe5cc00 (ACPI NVS)
 BIOS-e820: 00000000cfe5cc00 - 00000000cfe5ec00 (ACPI data)
 BIOS-e820: 00000000cfe5ec00 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fe000000 - 00000000ff000000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
DMI 2.5 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D7FFF write-protect
  D8000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 2000000000 write-back
  1 base 00CFF00000 mask 3FFFF00000 uncachable
  2 base 00D0000000 mask 3FF0000000 uncachable
  3 base 00E0000000 mask 3FE0000000 uncachable
  4 base 1FF0000000 mask 3FF0000000 uncachable
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 128GB, type WB
reg 1, base: 3327MB, range: 1MB, type UC
reg 2, base: 3328MB, range: 256MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
reg 4, base: 130816MB, range: 256MB, type UC
total RAM covered: 130047M
 gran_size: 64K 	chunk_size: 64K 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 64K 	chunk_size: 128K 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 64K 	chunk_size: 256K 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 64K 	chunk_size: 512K 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 64K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 64K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 64K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 64K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 64K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 64K 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 64K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 64K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 64K 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 64K 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114432M
 gran_size: 64K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 64K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 128K 	chunk_size: 128K 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 128K 	chunk_size: 256K 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 128K 	chunk_size: 512K 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 128K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 128K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 128K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 128K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 128K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 128K 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 128K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 128K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 128K 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 128K 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114432M
 gran_size: 128K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 128K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 256K 	chunk_size: 256K 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 256K 	chunk_size: 512K 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 256K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 256K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 256K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 256K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 256K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 256K 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 256K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 256K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 256K 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 256K 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114432M
 gran_size: 256K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 256K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 512K 	chunk_size: 512K 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 512K 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 512K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 512K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 512K 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 512K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 512K 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 512K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 512K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 512K 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 512K 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114432M
 gran_size: 512K 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 512K 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 1M 	chunk_size: 1M 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 1M 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 1M 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 1M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 1M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 1M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 1M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 1M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 1M 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 1M 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114432M
 gran_size: 1M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 1M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98048M
 gran_size: 2M 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 2M 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 98049M
 gran_size: 2M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 98049M
 gran_size: 2M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 98049M
 gran_size: 2M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 98049M
 gran_size: 2M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 98049M
 gran_size: 2M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 98049M
 gran_size: 2M 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98049M
 gran_size: 2M 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114433M
 gran_size: 2M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98049M
 gran_size: 2M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98049M
 gran_size: 4M 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 4M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 98051M
 gran_size: 4M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 98051M
 gran_size: 4M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 98051M
 gran_size: 4M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 98051M
 gran_size: 4M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 98051M
 gran_size: 4M 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98051M
 gran_size: 4M 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114435M
 gran_size: 4M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98051M
 gran_size: 4M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98051M
 gran_size: 8M 	chunk_size: 8M 	num_reg: 7  	lose cover RAM: 126727M
 gran_size: 8M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 98055M
 gran_size: 8M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 98055M
 gran_size: 8M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 98055M
 gran_size: 8M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 98055M
 gran_size: 8M 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98055M
 gran_size: 8M 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114439M
 gran_size: 8M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98055M
 gran_size: 8M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98055M
 gran_size: 16M 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 122639M
 gran_size: 16M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 98063M
 gran_size: 16M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 98063M
 gran_size: 16M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 98063M
 gran_size: 16M 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98063M
 gran_size: 16M 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114447M
 gran_size: 16M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98063M
 gran_size: 16M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98063M
 gran_size: 32M 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 114463M
 gran_size: 32M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 98079M
 gran_size: 32M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 98079M
 gran_size: 32M 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98079M
 gran_size: 32M 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114463M
 gran_size: 32M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98079M
 gran_size: 32M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98079M
 gran_size: 64M 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 98111M
 gran_size: 64M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 98111M
 gran_size: 64M 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98111M
 gran_size: 64M 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114495M
 gran_size: 64M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98111M
 gran_size: 64M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98111M
 gran_size: 128M 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 65407M
 gran_size: 128M 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 98175M
 gran_size: 128M 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 114559M
 gran_size: 128M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 98175M
 gran_size: 128M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 98175M
 gran_size: 256M 	chunk_size: 256M 	num_reg: 7  	lose cover RAM: 32767M
*BAD*gran_size: 256M 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: -1M
*BAD*gran_size: 256M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: -1M
*BAD*gran_size: 256M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: -1M
 gran_size: 512M 	chunk_size: 512M 	num_reg: 7  	lose cover RAM: 32767M
*BAD*gran_size: 512M 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: -1M
*BAD*gran_size: 512M 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: -1M
 gran_size: 1G 	chunk_size: 1G 	num_reg: 7  	lose cover RAM: 32767M
*BAD*gran_size: 1G 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: -1M
 gran_size: 2G 	chunk_size: 2G 	num_reg: 7  	lose cover RAM: 17407M
mtrr_cleanup: can not find optimal value
please specify mtrr_gran_size/mtrr_chunk_size
e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfe0a max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cfe0a000
 0000000000 - 00cfe00000 page 2M
 00cfe00000 - 00cfe0a000 page 4k
kernel direct mapping tables up to cfe0a000 @ 8000-e000
init_memory_mapping: 0000000100000000-0000000230000000
 0100000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ c000-16000
RAMDISK: 372a5000 - 37fef614
ACPI: RSDP 00000000000febf0 00024 (v02 DELL  )
ACPI: XSDT 00000000000fcd4d 00074 (v01 DELL    B9K     00000015 ASL  00000061)
ACPI: FACP 00000000000fce7d 000F4 (v03 DELL    B9K     00000015 ASL  00000061)
ACPI: DSDT 00000000fff632cd 03AD6 (v01   DELL    dt_ex 00001000 INTL 20050624)
ACPI: FACS 00000000cfe0ac00 00040
ACPI: SSDT 00000000fff66ec4 000AC (v01   DELL    st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fcf71 000AA (v01 DELL    B9K     00000015 ASL  00000061)
ACPI: BOOT 00000000000fd01b 00028 (v01 DELL    B9K     00000015 ASL  00000061)
ACPI: ASF! 00000000000fd043 00096 (v32 DELL    B9K     00000015 ASL  00000061)
ACPI: MCFG 00000000000fd0d9 0003E (v01 DELL    B9K     00000015 ASL  00000061)
ACPI: HPET 00000000000fd117 00038 (v01 DELL    B9K     00000015 ASL  00000061)
ACPI: TCPA 00000000000fd373 00032 (v01 DELL    B9K     00000015 ASL  00000061)
ACPI: DMAR 00000000000fd3a5 000C8 (v01 DELL    B9K     00000015 ASL  00000061)
ACPI: SLIC 00000000000fd14f 00176 (v01 DELL    B9K     00000015 ASL  00000061)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000230000000
Bootmem setup node 0 0000000000000000-0000000230000000
  NODE_DATA [0000000000011000 - 0000000000044fff]
  bootmap [0000000000045000 -  000000000008afff] pages 46
(8 early reservations) ==> bootmem [0000000000 - 0230000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0001ca0ff8]    TEXT DATA BSS ==> [0001000000 - 0001ca0ff8]
  #3 [00372a5000 - 0037fef614]          RAMDISK ==> [00372a5000 - 0037fef614]
  #4 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
  #5 [0001ca1000 - 0001ca11dc]              BRK ==> [0001ca1000 - 0001ca11dc]
  #6 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
  #7 [000000c000 - 0000011000]          PGTABLE ==> [000000c000 - 0000011000]
found SMP MP-table at [ffff8800000fe710] fe710
Reserving 129MB of memory at 32MB for crashkernel (System RAM: 8960MB)
 [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x0000009d
    0: 0x00000100 -> 0x000cfe0a
    0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2096550
  DMA zone: 56 pages used for memmap
  DMA zone: 110 pages reserved
  DMA zone: 3830 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 833090 pages, LIFO batch:31
  Normal zone: 17024 pages used for memmap
  Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec88000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec89000] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec89000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009d000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfe0a000 - 00000000cfe0b000
PM: Registered nosave memory: 00000000cfe0b000 - 00000000cfe5c000
PM: Registered nosave memory: 00000000cfe5c000 - 00000000cfe5d000
PM: Registered nosave memory: 00000000cfe5d000 - 00000000cfe5e000
PM: Registered nosave memory: 00000000cfe5e000 - 00000000cfe5f000
PM: Registered nosave memory: 00000000cfe5f000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 00000000ffb00000
PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s95064 r8192 d23720 u262144
pcpu-alloc: s95064 r8192 d23720 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2065080
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
AMD-Vi disabled by default: pass amd_iommu=on to enable
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 8043248k/9175040k available (4939k kernel code, 788840k absent, 342952k reserved, 3932k data, 1220k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1288
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2992.146 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.29 BogoMIPS (lpj=2992146)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20287 entries in 80 pages
DMAR: Host address width 38
DMAR: DRHD base: 0x000000fe710000 flags: 0x0
IOMMU fe710000: ver 1:0 cap 900000c2f0462 ecap e01
DMAR: DRHD base: 0x000000fe714000 flags: 0x0
IOMMU fe714000: ver 1:0 cap 900000c2f0462 ecap e01
DMAR: DRHD base: 0x000000fe719000 flags: 0x0
IOMMU fe719000: ver 1:0 cap 900000c2f0462 ecap e01
DMAR: DRHD base: 0x000000fe718000 flags: 0x1
IOMMU fe718000: ver 1:0 cap 900000c2f0462 ecap e01
DMAR: RMRR base: 0x000000cfe61000 end: 0x000000cfe6ffff
DMAR: No ATSR found
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           X5450  @ 3.00GHz stepping 0a
Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (47907.62 BogoMIPS).
Testing NMI watchdog ... OK.
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2600 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbffc000-0xfbffffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfedf]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9703ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:02:00.0: reg 24 io port: [0xdc80-0xdcff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbd00000-0xfbd7ffff]
pci 0000:00:05.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:05.0: bridge 32bit mmio: [0xf8000000-0xfbdfffff]
pci 0000:00:05.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
pci 0000:03:00.3: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:09.0: bridge 32bit mmio: [0xf7d00000-0xf7ffffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
pci 0000:04:01.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:03:00.0: bridge io port: [0xc000-0xcfff]
pci 0000:03:00.0: bridge 32bit mmio: [0xf7d00000-0xf7efffff]
pci 0000:05:00.0: reg 10 io port: [0xcc00-0xccff]
pci 0000:05:00.0: reg 14 64bit mmio: [0xf7dec000-0xf7deffff]
pci 0000:05:00.0: reg 1c 64bit mmio: [0xf7df0000-0xf7dfffff]
pci 0000:05:00.0: reg 30 32bit mmio pref: [0xf7e00000-0xf7efffff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:04:00.0: bridge io port: [0xc000-0xcfff]
pci 0000:04:00.0: bridge 32bit mmio: [0xf7d00000-0xf7efffff]
pci 0000:08:00.0: reg 10 64bit mmio: [0xf7cf0000-0xf7cfffff]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.0: bridge 32bit mmio: [0xf7c00000-0xf7cfffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI4.PCI5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI4.PCI6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI9._PRT]
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x800-0x85f has been reserved
system 00:01: ioport range 0xc00-0xc7f has been reserved
system 00:01: ioport range 0x860-0x8ff has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [0xfbe00000-0xfbefffff]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
pci 0000:00:05.0:   bridge window [0xd000-0xdfff]
pci 0000:00:05.0:   bridge window [0xf8000000-0xfbdfffff]
pci 0000:00:05.0:   bridge window [0xd0000000-0xdfffffff]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0:   bridge window [0xc000-0xcfff]
pci 0000:04:00.0:   bridge window [0xf7d00000-0xf7efffff]
pci 0000:04:00.0:   bridge window [mem pref disabled]
pci 0000:04:01.0: PCI bridge to [bus 06-06]
pci 0000:04:01.0: PCI bridge, secondary bus 0000:06
pci 0000:04:01.0:   bridge window [io  disabled]
pci 0000:04:01.0:   bridge window [mem disabled]
pci 0000:04:01.0:   bridge window [mem pref disabled]
pci 0000:03:00.0: PCI bridge to [bus 04-06]
pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
pci 0000:03:00.0:   bridge window [0xc000-0xcfff]
pci 0000:03:00.0:   bridge window [0xf7d00000-0xf7efffff]
pci 0000:03:00.0:   bridge window [mem pref disabled]
pci 0000:03:00.3: PCI bridge to [bus 07-07]
pci 0000:03:00.3: PCI bridge, secondary bus 0000:07
pci 0000:03:00.3:   bridge window [io  disabled]
pci 0000:03:00.3:   bridge window [mem disabled]
pci 0000:03:00.3:   bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 03-07]
pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
pci 0000:00:09.0:   bridge window [0xc000-0xcfff]
pci 0000:00:09.0:   bridge window [0xf7d00000-0xf7ffffff]
pci 0000:00:09.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.0:   bridge window [io  disabled]
pci 0000:00:1c.0:   bridge window [0xf7c00000-0xf7cfffff]
pci 0000:00:1c.0:   bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 09-09]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
  alloc irq_desc for 48 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
pci 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 52 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:05.0: setting latency timer to 64
  alloc irq_desc for 56 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:09.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:00:09.0: setting latency timer to 64
pci 0000:03:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:03:00.0: setting latency timer to 64
pci 0000:04:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:04:00.0: setting latency timer to 64
pci 0000:04:01.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:04:01.0: setting latency timer to 64
pci 0000:03:00.3: setting latency timer to 64
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbdfffff]
pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:03: resource 1 mem: [0xf7d00000-0xf7ffffff]
pci_bus 0000:04: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:04: resource 1 mem: [0xf7d00000-0xf7efffff]
pci_bus 0000:05: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:05: resource 1 mem: [0xf7d00000-0xf7efffff]
pci_bus 0000:08: resource 1 mem: [0xf7c00000-0xf7cfffff]
pci_bus 0000:09: resource 3 io:  [0x00-0xffff]
pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:02:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13609k freed
Simple Boot Flag at 0x7a set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1300543202.175:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15736
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key CAC4E290ACAA49CE
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program 
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
  alloc irq_desc for 72 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 72 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 73 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:05.0: irq 73 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
  alloc irq_desc for 74 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:09.0: irq 74 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
  alloc irq_desc for 75 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 75 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:03:00.0: setting latency timer to 64
  alloc irq_desc for 76 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:04:00.0: irq 76 for MSI/MSI-X
pcieport 0000:04:00.0: setting latency timer to 64
  alloc irq_desc for 77 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:04:01.0: irq 77 for MSI/MSI-X
pcieport 0000:04:01.0: setting latency timer to 64
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xff980800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.18.2.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-71.18.2.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-71.18.2.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-71.18.2.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-71.18.2.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2011-03-19 14:00:05 UTC (1300543205)
Initalizing network drop monitor service
Freeing unused kernel memory: 1220k freed
Write protecting the kernel read-only data: 7184k
dracut: dracut-004-33.2.el6_0
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
Fusion MPT base driver 3.04.16
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.16
mptsas 0000:05:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068E B3: Capabilities={Initiator}
mptsas 0000:05:00.0: setting latency timer to 64
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: New USB device found, idVendor=046d, idProduct=c505
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Receiver
usb 2-1: Manufacturer: Logitech
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4
generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
scsi0 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=56
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 9, phy 0, sas_addr 0x1221000000000000
scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-2 3B01 PQ: 0 ANSI: 5
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000
scsi 0:0:1:0: Direct-Access     ATA      WDC WD6400AAKS-2 3B01 PQ: 0 ANSI: 5
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 8, phy 2, sas_addr 0x1221000002000000
scsi 0:0:2:0: Direct-Access     ATA      WDC WD5000AAKS-2 3B01 PQ: 0 ANSI: 5
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x1221000003000000
scsi 0:0:3:0: Direct-Access     ATA      WDC WD5000AAKS-2 3B01 PQ: 0 ANSI: 5
mptsas: ioc0: attaching raid volume, channel 1, id 2
scsi 0:1:2:0: Direct-Access     Dell     VIRTUAL DISK     1028 PQ: 0 ANSI: 5
mptsas: ioc0: attaching raid volume, channel 1, id 0
scsi 0:1:0:0: Direct-Access     Dell     VIRTUAL DISK     1028 PQ: 0 ANSI: 5
ahci 0000:00:1f.2: version 3.0
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970100 irq 20
ata2: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970180 irq 20
ata3: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970200 irq 20
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: PLDS DVD+/-RW DH-16AAS, JD12, max UDMA/100, ATAPI AN
ata1.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DH-16AAS JD12 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi7 : ata_piix
scsi8 : ata_piix
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata7: port disabled. ignoring.
ata8: port disabled. ignoring.
sd 0:1:2:0: [sda] 1951399936 512-byte logical blocks: (999 GB/930 GiB)
sd 0:1:0:0: [sdb] 2498232320 512-byte logical blocks: (1.27 TB/1.16 TiB)
sd 0:1:2:0: [sda] Write Protect is off
sd 0:1:2:0: [sda] Mode Sense: 03 00 00 08
sd 0:1:0:0: [sdb] Write Protect is off
sd 0:1:0:0: [sdb] Mode Sense: 03 00 00 08
sd 0:1:2:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:1:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
 sdb: sda1 sda2 sda3
 sdb1 sdb2 sdb3
sd 0:1:0:0: [sdb] Attached SCSI disk
sd 0:1:2:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda2): mounted filesystem with ordered data mode
EXT4-fs (sda2): barriers disabled
EXT4-fs (sda2): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sda2
dracut: Loading SELinux policy
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1300543225.016:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy: No such file or directory
dracut: Switching root
readahead-collector: starting
udev: starting version 147
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:02:00.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
nvidia 0000:02:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.36  Tue Jan 18 16:56:11 PST 2011
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Mar  2 2011
EDAC MC0: Giving out device to 'i5400_edac.c' 'I5400': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5400_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  alloc irq_desc for 78 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 78 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
tg3.c:v3.108 (February 17, 2010)
tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:08:00.0: setting latency timer to 64
eth0: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:23:ae:aa:b0:2a
eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
scsi 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Attached scsi generic sg1 type 0
scsi 0:0:2:0: Attached scsi generic sg2 type 0
scsi 0:0:3:0: Attached scsi generic sg3 type 0
sd 0:1:2:0: Attached scsi generic sg4 type 0
sd 0:1:0:0: Attached scsi generic sg5 type 0
sr 1:0:0:0: Attached scsi generic sg6 type 5
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
Adding 4194296k swap on /dev/sda3.  Priority:-1 extents:1 across:4194296k 
microcode: CPU0 sig=0x1067a, pf=0x40, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU1 sig=0x1067a, pf=0x40, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU2 sig=0x1067a, pf=0x40, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU3 sig=0x1067a, pf=0x40, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU4 sig=0x1067a, pf=0x40, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU5 sig=0x1067a, pf=0x40, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU6 sig=0x1067a, pf=0x40, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU7 sig=0x1067a, pf=0x40, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
Microcode Update Driver: v2.00 , Peter Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Bridge firewalling registered
  alloc irq_desc for 79 on node -1
  alloc kstat_irqs on node -1
tg3 0000:08:00.0: irq 79 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
device eth0 entered promiscuous mode
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
br0: port 1(eth0) entering forwarding state
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
br0: no IPv6 routers present
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
eth0: no IPv6 routers present
lo: Disabled Privacy Extensions
readahead-collector: sorting
readahead-collector: finished
fuse init (API version 7.13)
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs INFO UDF: Mounting volume 'UDF Volume', timestamp 2010/11/21 08:07 (103c)

Return To 2011-03-19 13:45 System Information